|
| |
|
Home | Consulting | Training | Expert Witness | Failure Analysis | Design Review | Corrosion Test | Corrosion Software | Protective Coatings | Materials Selection | Cathodic Protection | >>> | |
 Corrosion Modeling Software and Corrosion Prediction Software Series HF-Compass®: HF Corrosion Modeling and Prediction High-Value Software Solutions to Costly Corrosion Version 9.23
Anytime Anywhere Any Device Any OS No USB dongles No installation No Browser Plug-ins |
|
Why WebCorr |
Performance Guarantee |
Unparalleled Functionality |
Unmatched Usability |
Any Device Any OS |
Free Training
& Support |
CorrCompass |
|
|
HF-Compass is the only device and OS independent predictive software on the market for the modeling and prediction of corrosion by aqueous hydrofluoric acid and anhydrous HF. Designers, engineers, consultants, maintenance and inspection personnel can quickly assess and quantify the impact of process variables on the corrosion rate and the remaining life of piping, vessels, and other equipment handling aqueous hydrofluoric acid or anhydrous HF.
Figures below demonstrate the operation of HF-Compass. With HF-Compass, corrosion prediction and materials selection for HF services are as easy as 1-2-3. (1) Select the material from the dropdown list, (2) Enter the temperature and the concentration of hydrofluoric acid (3) Review the prediction results
HF-Compass predicts the boiling point of the hydrofluoric acid (HF), the corrosion rate of the selected alloy at the specified temperature and concentration, the remaining life of the component, and the resistance of coatings/linings under the prevailing operating conditions. In addition to that, HF-Compass also plots the isocorrosion diagram for the selected alloy so as to give users a complete picture of the corrosion behavior of the selected alloy across the entire ranges of the HF acid concentration and the service temperature.
Figure 1 HF-Compass Predicts the corrosion rate of alloys in hydrofluoric acid services
Figure 2 HF-Compass is a cost-effective
software tool for materials selection for hydrofluoric acid services
HF-Compass predicts corrosion rates for the following steels and alloys
in aqueous hydrofluoric acid at any temperatures and concentrations:
90-10 copper nickel
More alloys will be added to the software database as and when corrosion
data are available. If you cannot find the alloy of your interest in HF-Compass
software, do let us know and we will conduct the necessary research work
to have your alloys included in the software.
For alloys not resistant to corrosion under the prevailing operating
conditions, coatings/linings can be used to provide the required
corrosion resistance. HF-Compass allows users to evaluate the
suitability of coatings/linings for corrosion protection (Figure 3
below).
Figure 3 HF-Compass allows users to
select suitable coatings/linings for corrosion protection in
hydrofluoric acid services
HF-Compass also predicts corrosion by anhydrous hydrofluoric acid for
metals and alloys (Figures 4 and 5).
Figure 4 Prediction of Corrosion by Anhydrous HF
Figure 5 Materials Selection for Corrosion Resistant Alloys for
Anhydrous HF Services
The following corrosion resistant alloys for anhydrous hydrofluoric acid
services are included in the corrosion prediction software:
AISI 304
The powerful applications of HF-Compass are truly unlimited in engineering design,
corrosion life prediction, and materials selection for hydrofluoric acid
services.
Click here to contact us for licensing details and experience the power of HF-Compass. |
|
|
HF-Compass, giving you the right directions in HF corrosion prediction and materials selection. |
|
|
Home | Contact Us | PDF |
Copyright © 1995-2024. WebCorr Corrosion Consulting Services. All rights reserved. |
Performance
